Site icon Bossor Laser

What is the difference between 6000W and 3000W fiber laser cutting machine

6000W and 3000W fiber laser cutting machine

Carbon steel bright cutting

From the fiber laser cutting machine cutting thickness analysis, 3000W fiber laser cutting machine bright surface cutting thickness is about 10MM; Compared with 3000W fiber laser cutting machine, the bright surface cutting thickness of 6000W fiber laser cutting machine is much greater than 3000W fiber laser cutting machine, its bright surface thickness of 16MM or less can be cut, and the cutting speed is fast, good verticality.

Full power cutting of carbon steel

Full power cutting is 100% power cutting, 6000W fiber laser cutting machine because it has good electro-optical conversion efficiency, good beam quality, high power density advantages, in the actual operation, because 6000W fiber laser cutting machine has full power cutting ability, and cutting speed, small taper and other advantages, Therefore, carbon steel with 16-25mm thickness can be cut with 6000W fiber laser cutting machine.

Stainless steel cutting

Compared with 3000W fiber laser cutting machine, 6000W fiber laser cutting machine is in line with the safety standards of laser equipment in Developed countries in Europe and the United States. Using laser beam cutting, compared with 3000W fiber laser cutting machine, 6000W fiber laser cutting machine can improve the cutting speed by 140%~330%, which can effectively improve work efficiency.

No burr cutting

Commonly used laser cutting machine used in oxygen or nitrogen for operation, low requirements in section, optical fiber laser cutting machine on the basis of the air can also be used for cutting, through the air compressor air compressor to storage tanks, filtered cooler for cooling after drying can be used, this way, can effectively reduce the use of the user cost.

Exit mobile version