2000W Laser cutting machine is to focus the laser beam emitted by the laser through the optical path system into high power density laser beam. The laser beam shines on the surface of the workpiece to reach the melting point or boiling point, while the high-pressure gas coaxial with the beam blows away the molten or vaporized metal. As the relative position of the beam and the workpiece moves, the material eventually forms a slit, so as to achieve the purpose of cutting.
Warm tips: laser cutting machine as a large precision processing equipment, many people are not very clear about its safe operation, we in the operation of metal laser cutting machine, should pay attention to the following points;
1, when operating the laser cutting machine, to be carried out in accordance with the operating instructions operation, especially in the area of security, can't casually disorderly use, operation, to refer to all relevant specifications at any time, or that the operating personnel to attend the training, to get familiar with the performance of the laser cutting machine to use, familiar with the master and the related knowledge and content of the operating system.
2, in accordance with the provisions to wear a good variety of protective equipment, in the vicinity of the laser beam, to wear protective glasses in accordance with the requirements, in no confirmation of a material can use heating or laser irradiation, it is best not to process it, in order to prevent the potential danger of steam and smoke.
3, during the operation of the laser cutting machine, the operators can not leave their own jobs without authorization, nor can they let others instead of their care. At the same time to put a fire extinguisher can be reached at any time, when not in use, to turn off the laser cutting machine, not in the case of unprotected, placed in the vicinity of cloth, paper and other flammable items.
4, in the process of using laser cutting machine, if there is any abnormal situation, need to stop immediately, timely check and troubleshoot or report to the superior department. Usually also want to keep the laser cutter, bed and the surrounding place clean and tidy, can not have any oil, for plate, workpiece and waste materials, should be stored in accordance with the provisions.
